Assessment of probability of aircraft crashes for Nuclear Science Research Institute

Kamikawa, Yutaka; Suzuki, Makoto; Agake, Toshiki; Murakami, Takahiko; Morita, Yusuke; Shiina, Hidenori; Fukushima, Manabu; Hirane, Nobuhiko; Ouchi, Yasuhiro

JAEA-Technology 2023-030, 57 Pages, 2024/03

JAEA-Technology-2023-030.pdf:1.93MB

Owing to the publication of the latest data about aircraft crashes by Nuclear Regulation Authority (NRA), it was necessary to re-evaluate the probabilities of aircraft crashes for Nuclear Science Research Institute (NSRI). By using of the assessment method provided in "Regulatory Guide of the Assessment Standard for Probability of Airplane Crash on a Nuclear Power Reactor Facility", we re-evaluated the probabilities of aircraft crashes against the nuclear facilities in NSRI. As a result of the evaluations, the sum of the probabilities of aircraft crashes against Waste Treatment Facilities (maximum probability among all nuclear facilities in NSRI) is 5.6810 (times/(reactor year)) which is lower than 10 (times/(reactor year)) that is the assessment criterion whether aircraft crashes is considered to be "anticipated external human induced events" in design basis or not.

Applicability of equivalent linear analysis to reinforced concrete shear walls; 3D FEM simulation of experiment results of seismic wall ultimate behavior

Ichihara, Yoshitaka*; Nakamura, Naohiro*; Moritani, Hiroshi*; Horiguchi, Tomohiro*; Choi, B.

Nihon Genshiryoku Gakkai Wabun Rombunshi, 21(1), p.1 - 14, 2022/03

https://doi.org/10.3327/taesj.J20.038

In this study, we aim to approximately evaluate the effect of nonlinearity of reinforced concrete structures through seismic response analysis using the equivalent linear analysis method. A simulation analysis was performed for the ultimate response test of the shear wall of the reactor building used in an international competition by OECD/NEA in 1996. The equivalent stiffness and damping of the shear wall were obtained from the trilinear skeleton curves proposed by the Japan Electric Association and the hysteresis curves proposed by Cheng et al. The dominant frequency, maximum acceleration response, maximum displacement response, inertia force-displacement relationship, and acceleration response spectra of the top slab could be simulated well up to a shear strain of approximately =2.010. The equivalent linear analysis used herein underestimates the maximum displacement response at the time of ultimate fracture of approximately =4.010. Moreover, the maximum shear strain of the shear wall could not capture the locally occurring shear strain compared with that of the nonlinear analysis. Therefore, when employing this method to evaluate the maximum shear strain and test results, including those during the sudden increase in displacement immediately before the fracture, sufficient attention must be paid to its applicability.

Highly sensitive detection of sodium in aqueous solutions using laser-induced breakdown spectroscopy with liquid sheet jets

Nakanishi, Ryuzo; Oba, Hironori; Saeki, Morihisa; Wakaida, Ikuo; Tanabe, Rie*; Ito, Yoshiro*

Optics Express (Internet), 29(4), p.5205 - 5212, 2021/02

https://doi.org/10.1364/OE.415308

Laser-induced breakdown spectroscopy (LIBS) combined with liquid jets was applied to the detection of trace sodium (Na) in aqueous solutions. The sensitivities of two types of liquid jets were compared: a liquid cylindrical jet with a diameter of 500 m and a liquid sheet jet with a thickness of 20 m. Compared with the cylindrical jet, the liquid sheet jet effectively reduced the splash from the laser-irradiated surface and produced long-lived luminous plasma. The limit of detection (LOD) of Na was determined to be 0.57 g/L for the sheet jet and 10.5 g/L for the cylindrical jet. The LOD obtained for the sheet jet was comparable to those obtained for commercially available inductively coupled plasma emission spectrometers.

Experimental evaluation of wall shear stress in a double contraction nozzle using a water mock-up of a liquid Li target for an intense fusion neutron source

Kondo, Hiroo*; Kanemura, Takuji*; Park, C. H.*; Oyaizu, Makoto*; Hirakawa, Yasushi; Furukawa, Tomohiro

Fusion Engineering and Design, 146(Part A), p.285 - 288, 2019/09

https://doi.org/10.1016/j.fusengdes.2018.12.047

Herein, the wall shear stress in a double contraction nozzle has been evaluated experimentally to produce a liquid lithium (Li) target as a beam target for intense fusion neutron sources such as the International Fusion Materials Irradiation Facility (IFMIF), the Advanced Fusion Neutron Source (A-FNS), and the DEMO Oriented Neutron Source (DONES). The boundary layer thickness and wall shear stress are essential physical parameters to understand erosion-corrosion by the high-speed liquid Li flow in the nozzle, which is the key component in producing a stable Li target. Therefore, these parameters were experimentally evaluated using an acrylic mock-up of the target assembly. The velocity distribution in the nozzle was measured by a laser-doppler velocimeter and the momentum thickness along the nozzle wall was calculated using an empirical prediction method. The resulting momentum thickness was used to estimate the variation of the wall shear stress along the nozzle wall. Consequently, the wall shear stress was at the maximum in the second convergent section in front of the nozzle exit.

Flow separation at inlet causing transition and intermittency in circular pipe flow

Ogawa, Masuro*

JAEA-Technology 2019-010, 22 Pages, 2019/07

JAEA-Technology-2019-010.pdf:1.5MB

Transition phenomena from laminar to turbulent flow are roughly classified into three categories. Circular pipe flow of the third category is linearly stable against any small disturbance, despite that flow actually transitions and transitional flow exhibits intermittency. These are among major challenges that are yet to be resolved in fluid dynamics. Thus, author proposes hypothesis as follows; "Flow in a circular pipe transitions from laminar flow because of vortices released from separation bubble forming in vicinity of inlet of pipe, and transitional flow becomes intermittent because vortex-shedding is intermittent." Present hypothesis can easily explain why linear stability theory has not been able to predict transition in circular pipe flow, why circular pipe flow actually transitions, why transitional flow actually exhibits intermittency even due to small disturbance, and why numerical analysis has not been able to predict intermittency of transitional flow in circular pipe.

Treatment technology of highly radioactive solid waste generated by experimental tests and sample analysis in reprocessing facilities

Goto, Yuichi; Inada, Satoshi; Kuno, Takehiko; Mori, Eito*

Nihon Hozen Gakkai Dai-16-Kai Gakujutsu Koenkai Yoshishu, p.221 - 224, 2019/07

Test equipment, containers, and analytical wastes, generated by experiments using spent fuel pieces in hot cell of Operation Testing Laboratory and by analysis of highly active liquid wastes in hot analytical cell line of Tokai Reprocessing Plant, are treated as highly radioactive solid wastes. These wastes are stored in specific shielded containers called waste cask and then transport to the storage facility. The treatment of these highly radioactive solid wastes have been carried out for 40 years with upgrading waste taking out system and transportation device. As a results, automation of several procedures have been achieved utilizing conventional equipment, and work efficiency and safety have been improved.

Hadronic Paschen-Back effect

Iwasaki, Sachio; Oka, Makoto; Suzuki, Kei*; Yoshida, Tetsuya*

Physics Letters B, 790, p.71 - 76, 2019/03

https://doi.org/10.1016/j.physletb.2018.10.024

We find a novel phenomenon induced by the interplay between a strong magnetic field and finite orbital angular momenta in hadronic systems, which is analogous to the Paschen-Back effect observed in the field of atomic physics. This effect allows the wave functions to drastically deform. We discuss anisotropic decay from the deformation as a possibility to measure the strength of the magnetic field in heavy-ion collision at LHC, RHIC and SPS, which has not experimentally been measured. As an example we investigate charmonia with finite orbital angular momentum in a strong magnetic field. We calculate the mass spectra and mixing rate. To obtain anisotropic wave functions, we apply the cylindrical Gaussian expansion method, where the Gaussian bases to expand the wave functions have different widths along transverse and longitudinal directions in the cylindrical coordinate.

Lessons learned from the process focusing on achieving the state of cold shutdown of Fukushima Daiichi Nuclear Power Plant Accident

Yoshizawa, Atsufumi*; Oba, Kyoko; Kitamura, Masaharu*

Ningen Kogaku, 54(3), p.124 - 134, 2018/06

Fukushima Daiichi Nuclear Power Plant caused a severe accident which released a large amount of radioactivity triggered by the Great East Japan Earthquake. The existing investigation reports of the accident prepared by several institutions pay attention only to the process which caused the accident but not much to the accident mitigation or the recovery process. This study focused on Unit 3 of Fukushima Daiichi Nuclear Power Plant, including its recovery process from the accident. Based on the public data, the time sequences for the recovery process between the accident occurrence and the state of cold shutdown were classified. Then, the groups of actions were sorted out in terms of ergonomics viewpoint. The important responses in the recovery process were identified and analyzed referring to the m-SHEL model. As a result, new lessons were learned from the accident case regarding the actions required for recovering from the accident.

Development of a gas-sheet target for a non-destructive profile monitor

Ogiwara, Norio; Hikichi, Yusuke*; Kamiya, Junichiro; Yamamoto, Kazami; Kinsho, Michikazu

Proceedings of 14th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.563 - 567, 2017/12

Identification of penetration path and deposition distribution of radionuclides in houses by experiments and numerical model

Hirouchi, Jun; Takahara, Shogo; Iijima, Masashi; Watanabe, Masatoshi; Munakata, Masahiro

Radiation Physics and Chemistry, 140, p.127 - 131, 2017/11

BB2016-0282.pdf:0.39MB

https://doi.org/10.1016/j.radphyschem.2017.02.005